1. |
Disconnect the negative(-) battery terminal.
|
2. |
Open the trunk and remove the trunk lid trim.
(Refer to Body - "Trunk Lid Trim")
|
3. |
Disconnect the rear view camera connector (A).
[2 Door]
[4 Door]
|
4. |
Pull down and remove the rear view camera holder (A).
|
5. |
Remove the rear view camera(A).
|
Engine Room Under Cover Removal and Installation
1.
Remove the under cover front panel (A).
2.
Remove the under covers (B).
Tightening torque:
3.9 ~ 5.9 N ...
Components Location
[LEV2 Type]
[SULEV Type]
1. PCV valve
2. Canister
3. Purge control solenoid valve (PCSV)
4. Fuel tank pressure sensor (FTPS)
5. Caniste ...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignitio ...