Kia Forte: Removal - Clutch Release Fork and Clutch Release Bearing - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Removal

1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the clutch release bearing (A).

3.
Pull the clip (A).

4.
Remove the clutch release fork (A).

5.
Remove the boot (A).

Components
1. Clutch release fork 2. Clutch cover assembly 3. Clutch disk assembly 4. Clutch release bearing ...

Inspection
1. Check for damage to boot. 2. Check for deformation to clutch release fork. 3. Check for deformation to clutc ...

See also:

Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the contacting surface of the cylinder block and the ma ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Rear Console Cover Component Location
1. Rear console cover ...

Copyright © www.kifomanual.com 2014-2025