Kia Forte: Inspection - Clutch Release Fork and Clutch Release Bearing - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Inspection

1.
Check for damage to boot.
2.
Check for deformation to clutch release fork.
3.
Check for deformation to clutch release bearing.
Removal
1. Remove the transaxle assembly. (Refer to Manual Transaxle System - " Manual Transaxle") 2. Remove the clutch release beari ...

Installation
1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

See also:

In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance ...

Battery Sensor Removal
1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the bat ...

Battery Cleaning
1. Make sure the ignition switch and all accessories are in the OFF position. 2. Disconnect the battery cables (negative first). ...

Copyright © www.kifomanual.com 2014-2025