Using SIRIUSTM Satellite Radio
Your Kia vehicle is equipped with a 3 month complimentary period of SIRIUS ™ Satellite Radio so you have access to over 130 channels of music, information, and entertainment programming.
Activation
In order to extend or reactivate your subscription to SIRIUSTM Satellite Radio, you will need to contact SIRIUSTM Customer Care at 800-643- 2112. Have your 12 digit SID (Sirius Identification Number) / ESN (Electronic Serial Number) ready. To retrieve the SID / ESN, turn on the radio, press the [RADIO] button, and tune to channel zero.
Please note that the vehicle will need to be turned on, in Sirius mode, and have an unobstructed view of the sky in order for the radio to receive the activation signal.
SEEK
Press the
key
❈ If the “Category” icon is displayed, channels are changed within the current category.
SCAN
Press the
key
Shortly pressing the key (under 0.8 seconds): Previews each broadcast for 5 seconds each
❈ Press the
key again to continue listening to the current frequency
❈ If the “Category” icon is displayed, channels are changed within the current category.
Category
Press the
key
Set through the
TUNE knob
❈ If channel is selected by selecting category, then the “CATEGORY” icon is displayed at the top of the screen.
Preset
Press the
key
~
✽ Troubleshooting
Antenna Error
If this message is displayed, the antenna or antenna cable is broken or unplugged. Please consult with your Kia dealership.
Acquiring Signal
If this message is displayed, it means that the antenna is covered and that the SIRIUS™ Satellite Radio signal is not available. Ensure the antenna is uncovered and has a clear view of the sky.
Tune
Menu
Select category menu through the
TUNE knob
Press the
key
Select [
Info] through the
TUNE knob or
key
Info (Information)
Displays the Artist/Song info of the current song.
CVVT Oil Control Valve (OCV) Installation
•
Install the component with the specified torques.
•
...
Specification
Item
Specification
Type
Hall sensor
Working voltage
6.5 ~1 5V
Output voltage
VL ≤ 0.5 V
(When output cu ...
Troubleshooting
•
The battery must be in good condition and fully charged
for this troubleshooting.
...