Kia Forte: Start/Stop Button Component

Description

System Overview The System offers the following features: - Human machine interface through a 1-stage button, for terminal switching and engine start. ...

Start/Stop Button Removal

1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center garnish [LH] (A). ...

See also:

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing ...

Installation
1. Install in the reverse order of removal. 2. After be equipped, perform bleeding air procedure in clutch release cylinder after pouring ...