Kia Forte: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Direct control VFS[UD/B]
▷ Control type : Normal high type
| Control Pressure kpa (kgf/cm², psi) |
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) |
| Current value(mA) |
50 ~ 850 |
| Internal resistance(Ω) |
5.1 |
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description
Underdrive Brake(UD/B) Control Solenoid is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the Underdrive Brake(UD/B).
...
See also:
Front Washer Motor Installation
1.
Install the washer reservoir.
Before installing the pump motor, check ...
Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray ...
Front Driveshaft Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Copyright © www.kifomanual.com 2014-2024