Kia Forte: Auto Head Lamp Leveling Unit Removal - Auto Head Lamp Leveling Device - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Auto Head Lamp Leveling Unit Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Removal

1.
Remove the head lamp leveling unit connector (A).
2.
Remove the head lamp leveling unit (B) after loosening the mounting bolts.

  
Pull the sensor linkage (A) to the direction of an arrow.

Auto Head Lamp Leveling Unit Inspection
1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. If the aim of the head lam ...

Auto Head Lamp Leveling Unit Installation
1. Install the head lamp leveling unit. 2. Reconnect the head lamp leveling unit connector. ...

See also:

Scheduled maintenance service
Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe ...

Temperature Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the t ...

PTC Heater Description
The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core. The PTC heater is an electric heater using a PTC element as an auxiliary hea ...

Copyright © www.kifomanual.com 2014-2024