1. |
Check the bushing for wear and deterioration.
|
2. |
Check the front stabilizer bar for deformation.
|
3. |
Check the all bolts and nuts.
|
Inspection
1.
Uplift the vehicle with lift.
2.
Loosen the oil filler plug (A).
3.
Check the oil level.
...
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~
0.08in), conform to below.
1.
Disconnect the s ...
Compression Pressure Inspection
If the there is lack of power, excessive oil consumption or poor
fuel economy, measure the compression pressure.
...