Kia Forte: Air Ventilation Seat Unit Components Location
Components Location (1)
| 1. Seat back blower 2. Seat cushion blower |
3. Air ventilation unit 4. Air ventilation switch |
Components Location (2)
Components Location (3)
Seat Heater Inspection
Front Seat
1.
Check for continuity and measure the resistance between terminals.
No.
Description
No.
Descripti ...
See also:
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance ...
Transaxle Control Module (TCM) Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harne ...
Filler-Neck Assembly Installation
1.
Install in the reverse order of removal.
Filler-neck assembly bracket
installation bolt :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ...