Kia Forte: Timing Chain Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Timing Chain Inspection
Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm
| 1. |
Check the CVVT sprocket and crankshaft sprocket for abnormal wear,
cracks, or damage. Replace if necessary.
|
| 2. |
Inspect the tensioner arm and chain guide for abnormal wear, cracks,
or damage. Replace if necessary.
|
| 3. |
Check that the tensioner piston moves smoothly.
|
Timing Chain Removal
1.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
2.
Set No.1 cylinder to TDC (Top ...
Timing Chain Installation
1.
Check that the TDC marks on the intake and exhaust CVVT sprockets
are slightly turned (about 2 to 3 teeth) from the TDC position after
the timing chain has been rem ...
See also:
Engine Control Module (ECM) Installation
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
LCD Modes
Service Mode
Service Interval
Service in
It calculates and displays when you need a scheduled maintenance service (mileage
or days).
If the remaining mileage or time reaches 900 mi. (1,50 ...
Brake Switch Installation
1.
Install in reverse of removal.
...
Copyright © www.kifomanual.com 2014-2024