Purge Control Solenoid Valve (PCSV) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the purge control solenoid valve connector (A) ...
Oil Pump Unit (OPU) Inspection
OPU Problem Inspection Procedure
1.
TEST OPU GROUND CIRCUIT: Measure resistance between OPU and chassis
ground using the backside of OPU harness connector ...
Starter Disassembly (NON-ISG Type)
1.
Disconnect the M-terminal (A) on the magnet switch assembly.
2.
After loosening the screws (A), detach the magnet switch ssembly
...