• |
Component location : Ignition
lock switch is connected to clutch pedal assembly.
|
• |
Function
|
1. |
Start is possible only when press down the clutch pedal.
|
2. |
Ignition lock switch can be prevent to unintended departure when
start the engine into the any range of the shift lever.
|
Power Seat Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Fuel Filter Removal
1.
Remove the fuel pump (Refer to “Fuel Pump” in this group).
2.
Disconnect the electric pump wiring connector (A) and the fuel
sender conn ...