Kia Forte: Removal - Driver Airbag (DAB) Module and Clock Spring - Airbag Module - Restraint - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring / Removal

1.
Set the front tires straight-ahead before removing the steering wheel.
  
If the steering wheel and the front tires are not set straight ahead together, it affects the number of circulation of steering wheel and the cable inside the clock spring is possible to be damaged.
2.
Disconnect the battery negative cable.
  
After disconnecting the battery negative cable, wait for at least thirty seconds.
3.
Remove the wiring fixing clip (C) and disconnect the horn connector (A).

4.
Release the connector locking pin, then disconnect the driver airbag module connector (B).
  
The removed airbag module should be stored in aclean, dry place with the pad cover facing up.
5.
Remove the steering wheel
(Refer to Steering System - "Steering wheel")
6.
Remove the steering column shroud.

7.
Disconnect the clock spring and horn connector, then remove the clock spring.

Components
1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring ...

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one.    ...

See also:

Transaxle Control Module (TCM) Circuit Diagram
...

Removal
1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. Remove the seat belt after pushin ...

26 Brake Control Solenoid Valve(26/B_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Copyright © www.kifomanual.com 2014-2025