Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result
in serious personal injury.
|
Drive Belt Removal
1.
Remove the drive belt.
(1)
Loosen the alternator mounting bolts (A).
(2)
Loo ...
Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box (SJB)
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer ...
Brake Line
Components
...