Kia Forte: Emergency Fastening Device (EFD)
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Restraint / Seat Belt Pretensioner / Emergency Fastening Device (EFD)
Front emergency fastening device operates as well as belt pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it is an equipment to make up for
the existing short stroke. Front emergency fastening device is an auxiliary
equipment to prevent the driver and passenger from breaking away doubly as seat
belt is being pulled toward anchor side after a collision.
Never attempt to measure the circuit resistance of the Emergency
Fastening Device (EFD) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury.
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Components
...
See also:
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
Crash Pad Lower Panel Component Location
1. Crash pad lower panel
...
Output Speed Sensor Specifications
▷ Type: Hall effect sensor
Operation condition [°C(°F)]
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.1 ~ 1.55)
0.043 ~ 0.061
Output voltage
...
Copyright © www.kifomanual.com 2014-2025