Kia Forte: Removal
| 1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the seat belt after pushing the lock pin (A).
|
| 3. |
Remove the door scuff trim.
(Refer to Body - "Door scuff trim")
|
| 4. |
Remove the center pillar trim.
(Refer to Body - "Center pillar trim")
|
| 5. |
Disconnect the emergency fastening device connector (A).
|
| 6. |
Loosen the emergency fastening device mounting bolt (B) and remove
the emergency fastening device.
|
Components
...
Installation
1.
Remove ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
See also:
Brake Switch Installation
1.
Install in reverse of removal.
...
Vehicle load limit
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that c ...
Camshaft Position Sensor (CMPS) Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Copyright © www.kifomanual.com 2014-2025