Kia Forte: IMS Power Seat Control Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Power Seat Control Installation

-	Make sure that the IMS control switch connectors and related connectors are plugged in properly.

-	Check the IMS control switch operates normally.

1.	Connect the connectors and reassemble the IMS control switch.

2.	Reassemble the front door trim.

IMS Power Seat Control Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") ...

IMS Control Switch Circuit diagram

...

See also:

TJ Joint Installation
1. Wrap tape around the driveshaft spline (TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

How vehicle audio works
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then processed by the radio and ...

Emergency Fastening Device (EFD)
Front emergency fastening device operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and ...

Categories

Copyright © www.kifomanual.com 2014-2025