Items |
Specified lubricants |
Quantity |
Clutch release cylinder assembly |
Brake fluid DOT 3 or DOT 4 |
As required |
Input shaft spline |
CASMOLY L9508 |
0.2 g |
Release bearing & Fork |
0.3 ~ 0.5 g |
|
Release Fork & Fulcrum |
0.5 ~ 1.0 g |
|
Release cylinder & Fork |
0.4 ~ 0.8 g |
|
Clutch release bearing and Clutch housing |
0.5~1.0 g |
Fuel Tank Removal
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
Removal
1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the clutch cover bolts. ...
Crankshaft Position Sensor (CKPS) Installation
•
Install the component with the specified torques.
•
...