Kia Optima Manuals

Kia Forte: Smart Key Diagnostic Inspection - Smart Key System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Smart Key Diagnostic Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Smart Key System / Smart Key Diagnostic Inspection

Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.
The following three features will be major problem in SMART KEY system.
1.
Problem in SMART KEY unit input.
2.
Problem in SMART KEY unit.
3.
Problem in SMART KEY unit output.
The following three diagnostic solutions will be the main solution process to a majority of concerns.
1.
SMART KEY unit Input problem : switch diagnosis
2.
SMART KEY unit problem : communication diagnosis
3.
SMART KEY unit Output problem : antenna and switch output diagnosis
Switch Diagnosis
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
2.
Select the vehicle model and then SMART KEY system.
3.
Select the "SMART KEY unit".
4.
After IG ON, select the "Current data".
5.
You can see the situation of each switch on scanner after connecting the "current data" process.
Display
 Description
FL Toggle switch
 ON : Push button is ON in the driver door handle.
FR Toggle switch
 ON : Push button is ON in the assist door handle.
Trunk switch
 ON : Trunk button is ON.
Gear P Position
 ON : Shift lever is P position.
IGN 1
 ON : IGN switch is IG position.
ACC
 ON : IGN switch is ACC position.
Push Knob switch
 ON : Push knob switch is ON.
External Buzzer
 ON : Buzzer is ON.

Communication Diagnosis With GDS (Self Diagnosis)
1.
Communication diagnosis checks that the each linked components operates normal.
2.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
3.
After IG ON, select the "DTC".
Antenna Actuation Diagnosis
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IG ON, select the "ACTUATION TEST".
3.
Set the smart key near the related antenna and operate it with a GDS.
4.
If the LED of smart key is blinking, the smart key is normal.
5.
If the LED of smart key is not blinking, check the voltage of smart key battery.
6.
Antenna actuation
A.
INTERIOR Antenna
B.
Trunk antenna
C.
BUMPER/Antenna
D.
DRV_DR Antenna
E.
AST_DR Antenna
Antenna Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
Select the "Antenna Status Check".
3.
After IG ON, select the "Antenna Status Check".
4.
Set the smart key near the related antenna and operate it with a GDS.
5.
If the smart key runs normal , the related antenna, smart key(transmission, reception) and exterior receiver are normal.
6.
Antenna status
A.
INTERIOR Antenna
B.
Trunk antenna
C.
BUMPER/Antenna
D.
DRV_DR Antenna
E.
AST_DR Antenna
Serial Communication Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
Select the "Serial Communication Line Check".
3.
After IGN ON, select the "Receiver Communication Line Check".
4.
Check the serial communication line with a GDS.
5.
If the smart key runs normal, the communication of smart key unit, exterior receiver are normal.
6.
If the smart key runs abnormal, check the following items.
A.
Disconnection or no response of the exterior receiver communication line.
B.
The exterior receiver communication line disconnection and ground connection.
Interior Antenna Actuation Check
1.
Set the smart key in the following shade area and check the IG ON.
2.
If the ignition is ON, the antenna runs normal.
3.
Check the interior antenna ignition mode.
4.
Set the smart key in the following shade area and actuate the antenna. Check the LED of smart key is blinking.
5.
If the LED of smart key is not blinking, check the antenna in shade area.
FOB Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IGN ON, select the "FOB KEY STATUS INFO".
Smart Key Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IGN ON, select the "SMK STATUS INFO".
Neutralization Status Check
1.
Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
2.
After IGN ON, select the "Neutralization mode".
Input Signal List
No.
 Item name
 Unit
1
 SSB SW1
 -
2
 SSB SW2
 -
3
 ACC
 -
4
 IGN1
 -
5
 IGN2
 -
6
 Gear 'P' Position (A/T)
Clutch SW (M/T)
 -
7
 Brake SW
 -
8
 FL Door Lock Button
 -
9
 FR Door Lock Button
 -
10
 Battery Voltage
 -
11
 Wheel Speed
 -
12
 RPM
 -
13
 Stop Lamp Fuse
 -
14
 Start Feed Back
 -

Actuator List
No.
 Item name
 Condition
1
 Immobilizer indicator Lamp (Cluster)
 Ignition switch ON
Engine off
2
 External Buzzer
 Ignition switch ON
Engine off
3
 Interior Antenna Active
 Ignition switch ON
Engine off
6
 Bumper/trunk Antenna Active
 Ignition switch ON
Engine off
7
 DRV_DR Antenna Active
 Ignition switch ON
Engine off
8
 AST_DR Antenna Active
 Ignition switch ON
Engine off
9
 SSB Illumination (OFF/ACC/ON)
 Ignition switch ON
Engine off
10
 ACC/IGN1/IGN2 Relay
 Ignition switch ON
Engine off
11
 ESCL Driver
 Ignition switch ON
Engine off

Smart Key Unit Installation
Smart Key Unit 1. Install the smart key unit and RF receiver. 2. Connect the connector and install the smart key unit. ...

Keyless Entry And Burglar Alarm
...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which tur ...

Cowl Side Trim Replacement
   • Put on gloves to protect your hands. &n ...

Categories


Copyright © www.kifomanual.com 2014-2024