Problem
|
Function
|
There are small red, blue, or green dots on the
screen
|
Because the LCD is manufactured with technology
requiring high point density, a pixel deficiency or lighting may occur within
0.01% of total pixels.
|
The sound or image is not working
|
| •
|
Has the switch for the vehicle been turned to [ACC] or
[ON]?
|
| •
|
Has the SYSTEM been turned OFF?
|
|
The video is being displayed but sound is not working
|
| •
|
Has the volume been set to a low level?
|
| •
|
Has the volume been set on mute?
|
|
When the power is turned on, the corners of the
screen are dark
|
| •
|
The display looking somewhat darker after prolonged periods
of use is a normal phenomenon with LCD panels. It is not a malfunction.
|
| •
|
If the screen is very dark, contact your point of purchase
or the nearest service center.
|
|
Sound is working from only one speaker
|
| •
|
Is the position of FAL/BAL sound controls or volume adjusted
to only one side?
|
|
Sound and video does not work in AUX mode
|
Is the audio and video connector jacks fully inserted
into the AUX terminal?
|
The external device is not working
|
Is the external device connected with a standard
connector cable?
|
The road is missing
|
Some map data may be missing or incorrect.
|
The road name is spoken incorrectly
|
The TTS(Text To Speech) engine speaks the street
name based off of the phonetic spelling.
This will continuously be update with the map datebase.
|
Problem
|
Possible Cause
|
Solution
|
The power does not turn on.
|
The fuse is disconnected.
|
Replace with a suitable fuse. If the fuse is disconnected
again, please contact your point of purchase or service center.
|
Device is not properly connected.
|
Check to see that the device has been properly
connected.
|
The CD does not play.
|
The DISC has not been inserted or has been inserted
upside down.
|
Insert the disc properly so that the sides are
facing the correct direction.
|
The DISC has been contaminated.
|
Wipe dirt dirt and other foreign substances from
the DISC.
|
The vehicle battery is low.
|
Charge the battery. If the problem persists, please
contact your point of purchase or service center.
|
A disc which is not supported by the device has
been inserted.
|
Insert a disc which is supported for play by the
device.
|
The sound does not work.
|
| •
|
The volume level is set the lowest level.
|
| •
|
The connector is not properly connected.
|
| •
|
The device is currently fast-forwarding, rewinding, scanning,
or playing in slow mode.
|
|
| •
|
Adjust the volume level.
|
| •
|
Check the connection state.
|
| •
|
The sound will not work when the device is fast-forwarding,
rewinding, scanning, or playing in slow mode.
|
|
The sound or video quality is low.
|
| •
|
The DISC is dirty or scrached.
|
| •
|
Vibration is occuring from the position in which the conversion
switch has been installed.
|
| •
|
The color and tone quality of the image is low.
|
|
| •
|
Wipe off water or dirt from the DISC. Do not use a disc
which has been scrached.
|
| •
|
The sound may be short-circuited and the image distorted
if the device begins to vibrate. The device will return to normal
operation once the vibration has stopped.
|
| •
|
Aging of the video display and deterioration in performance
may cause certain quality degradations.
|
|
The USB does not work.
|
| •
|
USB memory has been contaminated.
|
| •
|
A separately purchased USB HUB is being used.
|
| •
|
A USB extension cable is being used.
|
| •
|
A USB which is not a Metal Cover Type USB Memory is being
used.
|
| •
|
A HDD type, CF, SD Memory is being used.
|
| •
|
There are no music files which can be played.
|
|
| •
|
Please use after formatting the USB into FAT 12/16/32
format.
|
| •
|
Remove any foreign substances on the contact surface of
the USB memory and multimedia terminal.
|
| •
|
Directly connect the USB memory with the multimedia terminal
on the vehicle.
|
| •
|
Directly connect the USB memory with the multimedia terminal
on the vehicle.
|
| •
|
Use a standard USB memory.
|
| •
|
Use a standard USB memory.
|
| •
|
Only MP3, WMA file formats are supported. Please use only
the supported music file formats.
|
|
The iPod is not recognized even though it has been
connected.
|
| •
|
There are no titles which can be played.
|
| •
|
The iPod firmware version has not been properly updated.
|
| •
|
The iPod device does not recognize downloads.
|
|
| •
|
Use iTunes to download and save MP3 files into the iPod.
|
| •
|
Use iTunes to update the firmware version and reconnect
the iPod with the device.
|
| •
|
Reset the iPod and reconnect with the device.
|
|
See also:
Specifications
Items
Specifications
Clutch operation method
Hydraulic type
Clutch cover
Type
Diaphragm spring strap
Clutch disc
...
Description
TREAD Lamp
-
Tire Under Inflation / Leak Warning.
1.
Turn on condition
A.
When tire pressure is below a ...
Front Hub / Knuckle Components
1. Drive shaft coking nut
2. Brake disc
3. Wheel hub assembly
4. Wheel bearing
5. Snap ring
6. Dust cover
7. Knuckle
8. Drive shaft
...
Kia Forte: Troubleshooting Guide
Multimedia Jack Installation
MTS System