Kia Forte: Using the usb device
- To use an external USB device, make sure the device is not connected when
starting up the vehicle. Connect the device after starting up.
- If you start the engine when the USB device is connected, it may damage
the USB device. (USB flashdrives are very sensitive to electric shock.)
- If the engine is started up or turned off while the external USB device
is connected, the external USB device may not work.
- The System may not play unauthenticated MP3 or WMA files. It can only
play MP3 files with the compression rate between 8Kbps ~ 320Kbps. It can only
play WMA music files with the compression rate between 8Kbps ~ 320Kbps.
- Take precautions for static electricity when connecting or disconnecting
the external USB device.
- An encrypted MP3 PLAYER is not recognizable.
- Depending on the condition of the external USB device, the connected external
USB device can be unrecognizable.
- When the formatted byte/sector setting of External USB device is not either
512BYTE or 2048BYTE, then the device will not be recognized.
- Use only a USB device formatted to FAT 12/16/32.
- USB devices without USB I/F authentication may not be recognizable. •
Make sure the USB connection terminal does not come in contact with the human
body or other objects.
- If you repeatedly connect or disconnect the USB device in a short period
of time, it may break the device.
- You may hear a strange noise when connecting or disconnecting a USB device.
- If you disconnect the external USB device during playback in USB mode,
the external USB device can be damaged or may malfunction. Therefore, disconnect
the external USB device when the audio is turned off or in another mode. (e.g,
Radio, CD)
- Depending on the type and capacity of the external USB device or the type
of the files stored in the device, there is a difference in the time taken for
recognition of the device.
- Do not use the USB device for purposes other than playing music files.
- Playing videos through the USB is not supported.
- Use of USB accessories such as recharges or heaters using USB I/F may
lower performance or cause trouble.
- If you use devices such as a USB hub purchased separately, the vehicle’s
audio system may not recognize the USB device. In that case, connect the USB
device directly to the multimedia terminal of the vehicle.
- If the USB device is divided by logical drives, only the music files on
the highest-priority drive are recognized by car audio.
- Devices such as MP3 Player/ Cellular phone/Digital camera can be unrecognizable
by standard USB I/F can be unrecognizable.
- Charging through the USB may not be supported in some mobile devices.
- USB HDD or USB types liable to connection failures due to vehicle vibrations
are not supported. (i-stick type)
- Some non-standard USB devices (METAL COVER TYPE USB) can be unrecognizable.
- Some USB flash memory readers (such as CF, SD, micro SD, etc.) or external-HDD
type devices can be unrecognizable.
- Music files protected by DRM (DIGITAL RIGHTS MANAGEMENT) are not recognizable.
- The data in the USB memory may be lost while using this audio. Always
back up important data on a personal storage device.
- Please avoid using USB memory products which can be used as key chains
or cellular phone accessories as they could cause damage to the USB jack. Please
make certain only to use plug type connector products.
AM and FM radio signals are broadcast from transmitter towers located around
your city. They are intercepted by the radio antenna on your vehicle. This signal
is then processed by the radio and ...
Some iPod® models may not support communication protocol and files may
not properly play. Supported iPod® models: iPhone® 3GS/4 iPod® touch 1st~4th
generation iPod® nano 1st~6th generation iPod ...
See also:
Front Wiper Motor Removal
1.
Loosen the windshield wiper arm nut (B) after removing a wiper
cap (A).
2.
Remove the windshield wiper arm and blade.
...
TPMS Sensor
1.
Storage State
Sensors are in this state when they first arrive at dealership.
This state is entered by LF request/command only.
Either LF request ...
Hood switch Description
The hood switch is included as the influencing factors in the calculation
of the ISG function. If the hood is open, the engine must not be started or
stopped by the ISG function for safety re ...