Kia Forte: Auto Head Lamp Leveling Device

Auto Light Sensor Installation

1. Reconnect the auto light connector. 2. Install the auto light sensor. ...

Component Location

1. Headlamp leveling device switch 2. Headlamp leveling actuator ...

See also:

Hub nut tightening sequence
Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Engine start/stop button
Illuminated ENGINE START/STOP button Whenever the front door is opened, the ENGINE START/STOP button will illuminate for your convenience. The light will go off after about 30 seconds after the ...

Injector Inspection
1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the inject ...