Kia Forte: Charging System
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System
- Description
- On-vehicle Inpection
- Alternator Description
- Alternator Specification
- Alternator Components
- Alternator Circuit Diagram
- Alternator Removal
- Alternator Installation
- Alternator Disassembly
- Alternator Reassembly
- Alternator Inspection
- DC/DC Converter Description
- DC/DC Converter Operation Principle
- DC/DC Converter Component Location
- DC/DC Converter Circuit Diagram
- DC/DC Converter Removal
- DC/DC Converter Installation
- Battery Description
- Battery Specifications
- Battery Components
- Battery Adjustment
- Battery Removal
- Battery Installation
- Battery Vehicle parasitic current inspection
- Battery Cleaning
- Battery Troubleshooting
- Battery Sensor Description
- Battery Sensor Removal
- Battery Sensor Installation
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
See also:
Rear Hub - Carrier Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from ...
Installation
Pressure Side Impact Sensor
1.
Install the new pressure side impact sensor with the screws (B)
then connect the pressure side impact sensor connector (A).
...
Audio Remote Control Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the driver airbag module.
...
Copyright © www.kifomanual.com 2014-2024