Kia Forte: Fuel Filler Cap Description

A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

On-board Refueling Vapor Recovery (ORVR) valve Installation

1. Installation is the reverse of removal. ...

Fuel Tank Air Filter Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Dis ...

See also:

Oil Level Gauge & Pipe Removal and Installation
1. Remove the oil level gauge (A). 2. Install in the reverse order of removal. ...

Immobilizer Control Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel" ...

IMS Control Switch Inspection
1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...