Kia Forte: Fuel Tank Pressure Sensor (FTPS) Circuit Diagram

Fuel Tank Pressure Sensor (FTPS) Specification

Pressure [kPa (kgf/cm², in H2O) Output Voltage (V) -6.67 (-0.068, -26.8) 0.5 0 2.5 +6.67 (0.068, 26.8) 4.5 ...

Fuel Tank Pressure Sensor (FTPS) Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...

See also:

Injector Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to the ...

Shift Lever Inspection
1. Check operating of lever of T/M side when operating shift lever after assembly. 2. When shift lever to "R" position, check th ...

Blower Unit Components
1. Intake Seal 2. Intake Upper Case 3. Intake Actuator 4. Air Filter 5. Air Filter Cover 6. Intake Door Assembly 7. Intake Lower Case 8. NVH Pad 9. Blower Up ...