Kia Forte: Hydraulic System
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Hydraulic System
- Description
- Components Location
- Oil Cooler Components
- Oil Cooler Removal and Installation
- Oil Cooler Inspection
- Oil Pump Description
- Oil Pump Components
- Fluid Components Location
- Fluid Service Adjustment Procedure
- Fluid Replacement
- Valve Body Description
- Valve Body Components Location
- Valve Body Removal
- Valve Body Installation
Installation
1.
Install in the reverse order of removal.
If the oil seal on the transaxle case side is da ...
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves). The oil pump is powered by the engine.
Automatic Transaxle Fluid (ATF) passes ...
See also:
Variable Intake Solenoid (VIS) Valve Specification
Item
Specification
Coil resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]
...
Line Pressure Control Solenoid Valve Specifications
Direct control VFS[Line Pressure]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current val ...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the cluster facia panel.
...
Copyright © www.kifomanual.com 2014-2025